Q10. I have submitted my application in Manakonline portal and have been assigned an application number. How do I check the progress of my application?
A. You need to login to your manakonline account and check your dashboard and communication window regularly. BIS will send you all communications related to your application through your communication window. In case you need to get in touch with the
Q8. In the document list of the manakonline application form, at Sl No 4 there is a requirement for an “Undertaking/Declaration”. What should I submit here?
A. This is for product specific undertaking. Please see the undertaking form in Appendix II of the Product Manual, please fill the same up, with the necessary enclosures and upload it under this head.
Q7. Do we need to establish the testing facilities as per all the requirements of all the Indian Standards inside our factory?
A. No. The product manual issued also includes a Scheme of Inspection and Testing (or SIT) which defines the frequency of conducting the various tests specified in the Indian Standards. The SIT also specifies those tests for which in-house testing facilities
Q6. We are making hundreds of toys models/SKUs in our factory. Will BIS test each and every model/SKU before granting certification?
A. No, since there are a many models of toys being manufactured by most toy makers, it is practically difficult to test every model of toy for BIS certification. BIS has addressed this issue in the product manual for safety of toys which is available
Q5. I am not able to submit application from the manakonline portal. What is the issue?
A. Please use a suitable internet browser i.e. Mozilla Firefox 48.0 and above.
Q4. Is there a facility to submit an online application for grant of BIS licence?
A. Yes, for domestic manufacturers, applications are accepted only through the Manliness portal (www.manakonline.in). You are required to register yourself on the portal and then follow the instructions to apply for a licence providing all necessary details
Q3. My company has several toy manufacturing units operating from different locations. Can I get a single licence for all the manufacturing units?
A. No, as per the provisions of Scheme-I of Schedule-II of BIS (Conformity Assessment) Regulations, 2018, licence to use or apply a Standard Mark maybe granted by BIS only for a specific manufacturing premises. Thus, separate applications will be required
Q2. I am not a manufacturer of toys but am involved in the marketing and distribution of toys. Will I be able to get a BIS license?
A. No, as per the provisions of Scheme-I of Schedule-II of BIS (Conformity Assessment) Regulations, 2018, license to use or apply a Standard Mark may be granted by BIS only to the manufacturer of the product.
Q1. There are 7 standards mentioned in the Toys (Quality Control) Order, 2020. Do I need to submit separate applications for each standard?
A. No. Since more than 1 Indian Standard maybe applicable on each toy, it has been decided to make the application process simpler. Toys have been classified into the following 2 types for BIS certification: S. No. Type Applicable Primary Standard 1 Non-Electric
Are Multi Media Speaker Systems parts of Amplifiers or Electronic Musical Systems?
i) Multimedia Speakers with independent power supply are covered under CRS. ii) Multimedia Speakers with built-in amplifiers and having diverse audio input connectivity, would also fall in the category of Electronic Musical Systems, and hence are covered
Are digital video recorders (Security products connected with CCTV camera) covered under the Order?
Digital video recorders (Security products connected with CCTV camera) are covered under CRO Phase III.
Whether Video Door Phones are covered under the Order?
Video Door Phones are presently not covered under CRO, but its independent parts i.e. monitors, outdoor unit ( CCTV Camera) and adapter of the product are covered under CRO.
Whether LED lighting chains used in Christmas and New Year are covered under the Order?
LED Lighting Chains are covered under CRO Phase-III.
Is Feature Rich Voice over IP is covered under the Order?
This product is not within the scope of the Order.
Are Non - Encapsulated LED Drivers as per IS 15885 (Part 2/Sec 13) : 2012 covered under CRS?
Non-Encapsulated LED Drivers if they are not sold as a standalone product in open market are not covered. However, since a final lighting product manufacturer covered by the CRS would need to rely on designs and safety of drivers supplied in non-encapsulated
Testing of Sample is required for renewal?
No
Can we submit one application for different products.
No
How MSME is use for BIS?
They used as a address proof of AIR.
What is inclusion?
Registered manufactures can request for inclusion of new models of the same product and brand .
what is the role of AIR?
AIR represents indian authorized company on behalf of overseas manufacturer.
Does applicant can add 2 different products in one application?
No
What is amendment report?
-If any types of query raised by BIS , Then testing lab provide a test report against the query i.e. amendment report.
How many samples required for LED driver/smps testing?
- In case of led Driver ,3 samples are required (1. Highest wattage 2. Interim wattage 3. Lowest wattage)
What is termination marking?
- Termination marking is used for particular products like ( recessed light , flood light , driver)
Is BIS logo compulsory of registered model?
- Yes, BIS logo with Registered No is compulsory on lead model marking, if we added any type of series model in previous report.
What is IP(Ingress Protection ) testing?
Ingress Protection testing, or IP testing, determines a product's susceptibility to solid particle ingress (sand or dust) as well as water ingress.
What is rating?
Rating (current ) decided by manufacturer & Confirmation done by lab when sample submitted to lab . like input rating & output rating.
Which products added in phase 4?
The products comes under phase 4 are following:- 1. Standalone LED Modules for General Lighting 2. Lighting Chain (Rope light). 3. Keyboard 4. Automatic Teller Cash dispensing machines 5. USB Type External Hard Disk Drive 6. Wireless Headphone and Earphone
Which products added in phase 5?
1. Wireless microphone 2.Digital Camera 3. Video Camera 4. Webcam (Finished Product) 5. Smart Speakers (with and without Display) 6. Dimmers for LED products. 7.
what should be manufacturer date of battery /cell in power bank project?
In the testing process of power bank project cell / battery manufacturer date should not be more than 90 days .
Is Led package compulsory for light project?
Yes, Photo biological report is mandatory. Photobiological testing allows manufacturers to evaluate the safety of lamps and lamp systems, including luminaires. Photobiological standard IEC/EN 62471 defines exposure limits, measurement techniques, and
What is process of testing?
1. Collect the sample. 2. Testing samples submitted to lab . 2. Testing Required documents are verified. 3. TRF(Test Request form) generate for model no & rating. 4. All documents are submitted to the lab.. These statutory provisions confer upon BIS,
Testing time is different for class by project.
- Yes it is different.
What is output rating?
- Output rating represent in symbol of DC .
What is input rating?
- Input rating represent in AC symbol like (100-240vac).
what is the process of product testing when model name will be incorrect ?
1. Trf ( Test request form)Regenerate with correct model no. 2. again complete testing done by lab after that registration will be proceed.
Who is liable for testing of imported products – Importer or Foreign Manufacturer?
-It is the responsibility of manufacturer or its authorized Indian representative to get the products registered with BIS
Will the supplier’s test report be good enough for self-declaration for import?
No, The supplier’s test report is not acceptable.
How would identical models with minor changes be accommodated for registration without any testing?
- According to their rating. -According to their shape
What documents are required for testing?
- There are following documents required for testing 1. Cdf-ccl 2 Pcb& circuit diagram 3. Marking. 4. User manual 5. Rest documents depend upon on product category
Next Page